Back to Company
Type:
I/O Module
Description:
The DAQ Series Five Input Module comes equipped with five opticallyisolated, digital inputs. Each input can be used to monitor the state of a digital signal. The inputs can be used to trigger email alerts based on a single change of state or after a number of state changes. The inputs can also be used as counters, or to control the relay contacts of other ControlByWeb? products that are located in remote locations.
Connectivity:
Modbus TCP
Features:
No programming required; Built-in web server; Configurable input status web page; Email alarms; Built-in counters; Optically isolated inputs; Loss of Power flag; 14-pin removable terminal connector; DIN rail or wall-mount
Specifications:
Power requirements: 9-28VDC; I/O: 5 optically-isolated inputs; Input Voltage: 11-30VDC; Input Current: 4.9mA to 13.4mA; Minimum hold time on inputs: 62.5mS;
Input Functions: Monitor State, Counter, Remote Relay Control; Input to Remote Relay Settings: equal, invert, toggle, latch, pulse, none; Input Isolation: 1500V;
Counters: 5, Max Count: 65535, Maximum Count Rate: 8Hz; Network: 10/100 Base-T Ethernet Network Setup: Static IP address assignment, TCP port selectable Connectors: 14-Position, removable terminal strip; Operating Temperature: -20°C to 70°C (-4°F to 158°F); Size: 1.41 in (35.7 mm) wide X 3.88 in (98.5mm) tall X 3.1 in (78.0mm) deep; Weight: 5oz (142 grams); Enclosure Material: Lexan 940 (UL94 V0 flame rated); Electromagnetic Compliance: IEC CISPR 22, CISPR 24, FCC 47CFR15 (Class B), EU EN55024, EN55022; Product Safety: IEC 60950-1/EN60950-1
Copyright © 2005-2024 Modbus Organization, Inc. 800 Federal St., Andover, MA 01810. All rights reserved.
By using Modbus.org, you accept the terms of our visitor agreement and privacy policy.