Back to Company
UC150 Room thermostat/temperature controller
Type:
Controller
Description:
UC150 is a communicative room heating controller with one PWM output and a room sensor for control of a radiator or electrical heater. The controller is easy to operate with a turn/push button and features a legible 60 x 60 mm LCD display and a weekly time scheduler with RTC.
Connectivity:
Modbus TCP
Features:
The controller reads actual room temperature, setpoint shift by a knob, and set operation status which is set by short push of the knob (Comfort/Standby/Off/Party/Time schedule). Each operation mode has independent heating and cooling setpoints. Measured and set values are processed in a PI algorithm, at the output of which there is a PWM controlled 24 V triac. The output works either as PWM controlled by a PI controller, or on/off (thermostat). The functionality and control parameters, i.e. P and I constants, and hysteresis, can be set with a free configuration software, or by direct writing into the Modbus registers. See also UC250 (2x DI, 2x DO).
Specifications:
See attached spec. sheet.
Copyright © 2005-2024 Modbus Organization, Inc. 800 Federal St., Andover, MA 01810. All rights reserved.
By using Modbus.org, you accept the terms of our visitor agreement and privacy policy.